SDSHobby
C4260 SERIES MOTOR SHAFT D5MM WITH CIRCLIP
| L2 (Overall Length) | 80mm |
| L1 (Short End) | 21mm |
| D(Shaft Diameter) | 5mm |
| L3 x L4 (Groove) | 4.5 x 3.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C5045 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 66mm |
| L1 (Short End) | 21mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 4.5 x 4mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C4250 SERIES MOTOR SHAFT D5MM WITH CIRCLIP
| L2 (Overall Length) | 70mm |
| L1 (Short End) | 20.5mm |
| D(Shaft Diameter) | 5mm |
| L3 x L4 (Groove) | 4.5 x 3mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C5055 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 76mm |
| L1 (Short End) | 21.5mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 4.5 x 4.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C5065 SERIES MOTOR SHAFT D8MM WITH CIRCLIP
| L2 (Overall Length) | 86mm |
| L1 (Short End) | 22mm |
| D(Shaft Diameter) | 8mm |
| L3 x L4 (Groove) | 3 x 5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C6354 SERIES MOTOR SHAFT D10MM WITH CIRCLIP
| L2 (Overall Length) | 78mm |
| L1 (Short End) | 24.5mm |
| D(Shaft Diameter) | 10mm |
| L3 x L4 (Groove) | 4.5 x 6mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C6364 SERIES MOTOR SHAFT D10MM WITH CIRCLIP
| L2 (Overall Length) | 88mm |
| L1 (Short End) | 25mm |
| D(Shaft Diameter) | 10mm |
| L3 x L4 (Groove) | 4.5 x 6.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
C6374 SERIES MOTOR SHAFT D10MM WITH CIRCLIP
| L2 (Overall Length) | 98mm |
| L1 (Short End) | 24.5mm |
| D(Shaft Diameter) | 10mm |
| L3 x L4 (Groove) | 4.5 x 6.5mm |
Specification:, , Note:, The slot in the picture for reference only, subject to our available products and their dimension.,
SDSHobby
COMBO MLD70 GAS ENGINE+ STARTER DRIVE FOR MLD70 ENGINE WITH ONE-WAY TRANSMISSION, SELF PROTECTION FUNCTION
| Brushless Motor | >3536 (such as 3542), KV value |
| Brushless ESC | above 60A |
| Battery | 3S-4S 2200mah 25C Li-polymer Battery, 60A (discharging current) |
| Displacement | 4.25ci (70cc) |
| Configuration | 2C single cylinder air-cooled |
| Carburetor | Walbro pump |
| Ignition | CDI Electronic ignition w/Auto timing advance / Champion Y82 Spark Plug (Compatible with CM6) |
| Power Supply | 7.2 V-8.4 V Lipo Battery |
| Weight | 4.73 lbs (75.8oz) including ignition, muffler, Mounting Accessories |
| Maximum Output | 6.6BHP |
| Maximum RPM | 8000 RPM |
| Idle RPM | 1200-1500 RPM |
| Fuel | Unleaded Gasoline |
| Oil | 2-cycle high performance (synthetic is recommended) |
| Prop Selection | 22*8-24*8 |
| Product Size | L158mm*W250mm*H150mm |
MLD70-START :, Specification:, Only a switch channel can easily realize engine start-up after fixing this equipment., Technical Parameters:, Mix: 1:30 to 1:45, Kindly Remark:, This is new MLD70 with new updated CDI (6.0V-8.4V) and with new Updated Metal Reed Valve.,
One-way Drive transmission makes sure Drive only transfer One-Way from ...SDSHobby
EXTRA ELECTRIC EPP AEROBATICS AIRPLANES KIT TYPE C
| Wing span | 955mm |
| Motor | 2834, 2212, 2217, 950-1100KV Brushless outrunner |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
Length:945mm Wing area:15.2dm Weight:480g (without battery) ESC: 18-30A Battery: 3S ...SDSHobby
EZRUN BRUSHLESS SYSTEM(35A ESC+13T/3650 MOTOR+DIGITAL PROGRAM CARD) FOR 1/10 1/12 CAR (VERISON 2.0)
| With 4-6 cells Ni-MH/NiCd or 2S Lipo | On-Road |
| With 6-9 cells Ni-MH/NiCd or 3S Lipo | On-Road |
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, EZRUN-35A-Sensorless 1pcs, Motor:, EZRUN-3650S, Program Card:, Digital LEDs Program Card 1pcs, EZRUN-35A Brushless ESC for 1/10 Car:, Output:, Continuous 35A, burst 190A., Input:, 4-9 cells Ni-MH/NiCd or 2-3S LiPo., BEC:, 6V/1.5A (Linear mode built-in BEC)., Resistance:, 0.0015 Ohm., Motor Supported:, Sensorless Brushless Motor., Suitable Motor:, *, Suitable Car:, 1/12 and 1/10 on-road sport., Size:, 31.5mm (L) * 27.5mm (W) * 24mm (H)., Weight:, 30g (Without wires), * Note #1:, , EZRUN-35A Brushless ESC:, EZRUN-3650 Sensorless Brushless Motor for 1/10 Car:, KV Value:, KV3000, Turns:, 13T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 Sensorless Brushless Motor:, Top quality materials:, u,
Brushless motor 1pcs Note #1 u ≥ 9T, Off-Road ≥ ...SDSHobby
EZRUN SERIES BRUSHLESS SYSTEM COMBO FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| With 4-6 cells Ni-MH/NiCd or 2S Lipo | On-Road |
| With 6-9 cells Ni-MH/NiCd or 3S Lipo | On-Road |
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, EZRUN-35A-Sensorless 1pcs, Motor:, EZRUN-3650S, Program Card:, Digital LEDs Program Card 1pcs, EZRUN-35A Brushless ESC for 1/10 Car:, Output:, Continuous 35A, burst 190A., Input:, 4-9 cells Ni-MH/NiCd or 2-3S LiPo., BEC:, 6V/1.5A (Linear mode built-in BEC)., Resistance:, 0.0015 Ohm., Motor Supported:, Sensorless Brushless Motor., Suitable Motor:, *, Suitable Car:, 1/12 and 1/10 on-road sport., Size:, 31.5mm (L) * 27.5mm (W) * 24mm (H)., Weight:, 30g (Without wires), * Note #1:, , EZRUN-35A Brushless ESC:, EZRUN-3650 Sensorless Brushless Motor for 1/10 Car:, KV Value:, KV4300, Turns:, 9T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 Sensorless Brushless Motor:, Top quality materials:, u,
Brushless motor 1pcs Note #1 u ≥ 9T, Off-Road ≥ ...SDSHobby
DYNAM USB 4 CH SIMULATOR LEFT HAND
| Product Name | USB Simulator |
| Pleaser note | On a system with only minimum system requirements,the |
Minimum system requirements:, -100% Pentium III or AMD Athlon/64 compatible, Recommended system requirements:, -100% Pentium IV or AMD 64 compatible processor with at least 1600Mhz,
processor with at least 800Mhz -128MB RAM -1GB free hard ...SDSHobby
DYNAM USB 4 CH SIMULATOR RIGHT HAND
| Product Name | USB Simulator |
| Pleaser note | On a system with only minimum system requirements,the |
Minimum system requirements:, -100% Pentium III or AMD Athlon/64 compatible, Recommended system requirements:, -100% Pentium IV or AMD 64 compatible processor with at least 1600Mhz,
processor with at least 800Mhz -128MB RAM -1GB free hard ...SDSHobby
BIG RUBBER RING FOR BY8400-A 80CC STARTER(AIRPLANE)AND BY8500 TERMINATOR STARTERS FOR 80CC-250CC GAS AIRPLANE
| outer diameter | 52mm |
| inside diameter | 40mm |
| Height | 30mm |
Description:, The material of this product is Polyurethane, very good abrasion resistance function. The interior of the ring is designed according to the curve of the propeller. Big interface, big friction. So it will not damage the propeller and spinner., Specifications:, Size:,